When power loss spans more than one room but not the whole house, the fault is usually on one circuit or one GFCI protection chain — not a utility outage.
We identify which breaker or GFCI feeds the affected area and restore power safely.
Symptoms
- Two or more rooms lost power together
- One floor or wing of the house is dark
- Garage and bathroom out together
- Kitchen counter and adjacent room affected
- Utility power fine elsewhere in the house
Common causes
Several different issues can create similar symptoms. These are the most common causes we see in Leesburg homes:
- Tripped breaker feeding multiple rooms
- Tripped GFCI protecting outlets across several locations
- Failed connection at a heavily used outlet or junction
- Partial utility issue affecting one panel leg — less common
- Storm-related fault on one circuit
What you can safely check
These simple checks may help, but do not open panels, remove devices, or touch wiring. If you notice heat, sparking, or a burning smell, stop and call us.
- Check the full breaker panel — including AFCI and GFCI breakers
- Reset all GFCIs in kitchen, baths, garage, outdoors
- Note exactly which rooms and devices are affected
- Ask neighbors if they have full power — rules out utility outage
What not to do
These mistakes can make the problem worse or create a safety risk:
- Do not assume the whole panel failed
- Do not run extension cords across multiple rooms as a permanent fix
- Do not reset one breaker repeatedly if it trips again
- Do not ignore a multi-room outage that started with sparking
When to call Virginia Wired
- Multiple rooms stay dead after resetting breakers and GFCIs
- You're not sure which breaker controls the affected area
- The outage started with a pop, spark, or burning smell
- Power returned briefly then went out again
- Only part of the house has been out for more than a few hours
What we fix
We don't guess. We fix the problem. On every service call we check:
- Which breaker or GFCI feeds the affected rooms
- Whether one connection failure caused the spread
- Whether the panel and branch circuits are safe
- The repair needed to restore power to all affected areas
Get the problem fixed — book online.
Book a Repair VisitFrequently asked questions
Why did only part of my house lose power?
Usually one tripped breaker or GFCI chain — not a whole-house outage.
Can one GFCI affect multiple rooms?
Yes. One tripped GFCI can protect outlets in several rooms.
Should I call the utility company?
If neighbors have power and only part of your home is affected, the issue is likely inside your panel or circuits.
Related services
Related problems
- Half Room Has No Power
- Room Has No Power, Breaker Not Tripped
- One GFCI Controls Multiple Dead Outlets
- Breaker Keeps Tripping
Tell us what stopped working when you book — we'll confirm your appointment quickly.
Request Repair Help